High-Sensitivity Piezoelectric Buzzer For Electronic Equipment And Alerts

The MEIDI 17*8mm Piezoelectric Passive Buzzer family offers two resonant frequency options on a shared mechanical platform. Both variants share identical Φ17.0 × 8.0 mm dimensions and through-hole mounting, letting engineers pick frequency without PCB layout redesign — ideal for sourcing flexibility. The HNR-1708 features 3000 ± 500 Hz resonance, ≥85 dB SPL at 10 cm (12 Vp-p square wave), and 1 g weight. The HNR-1708 PA10 delivers 2000 ± 500 Hz resonance, ≥75 dB SPL at 10 cm, and 1.4 g. Both accept external square-wave drive for tone modulation. Manufactured with a coil-free piezoelectric actuator, black PBT housing, and through-hole mounting, they support wave and manual soldering processes.

Featuring two acoustic output tiers in one shared form factor, the MEIDI 14*4mm Piezoelectric Passive Buzzer series streamlines procurement for design teams. Both variants measure Φ13.8 × 4.0 mm and resonate at 4000 Hz, so engineers can swap sound pressure levels without reworking PCB layouts or drive circuitry. The standard HNR-1404 produces ≥70 dB while drawing ≤5 mA; the high-output HNR-1404 PA7.5 reaches ≥80 dB at ≤10 mA. Each runs on external square-wave or PWM signals spanning 1 V to 30 V, supporting adjustable tones through drive parameter changes. Supplied with a coil-free piezoelectric build — well-suited for magnetically sensitive environments — these buzzers come in black PBT housings with through-hole pins and are compatible with manual soldering.

The 1207 Piezoelectric Passive Buzzer with Pogo Pin is a through-hole piezoelectric passive buzzer. As a passive unit, it relies on an external AC drive — typically a square wave or PWM around its 4000 ± 500 Hz resonance — to produce audible output. Its drive signal spans 1–30 V peak-to-peak, giving circuit designers wide voltage flexibility without tight regulation. The 5 V rated voltage serves as the test reference. Measuring Φ12.5 × 7.0 mm and weighing 0.66 g, the black PBT housing suits both wave and manual soldering profiles. Its coil-free piezoelectric architecture sets it apart from electromagnetic buzzers, with no magnetic coil or moving armature inside — well-suited for sourcing into magnetically sensitive assemblies. Contact MEIDI for technical support, sample evaluation, or volume pricing.

The MEIDI HNR-1404 PA7.5 1404 Piezoelectric Passive Buzzer with Pogo Pin is a through-hole piezoelectric passive buzzer. It runs on an external AC signal, usually a square wave or PWM near its 4000 Hz resonance, to produce clear audible output. The 1–30 V peak-to-peak drive range works with diverse signal sources, and 5 V serves as the rated test reference. Measuring Φ13.8 × 4.0 mm and weighing 0.67 g, its compact form and black PBT housing support manual soldering for bulk production assembly. Well-suited for procurement across consumer electronics and industrial controls, you can contact MEIDI for technical queries, samples, or volume pricing.

The 1255 Piezoelectric Passive Buzzer with Pogo Pin is a piezoelectric passive buzzer in a through-hole mounting configuration. As a passive device, it requires an external AC drive signal — typically a square wave or PWM at or near the resonant frequency of 4000 ± 500 Hz — to generate audible output.
The 1–30 V operating voltage range is specified for the drive signal peak-to-peak amplitude. The rated voltage is 5 V for test condition reference.
The 12.5 ± 0.3 mm diameter and 5.5 ± 0.5 mm height define the through-hole mechanical envelope. The body mass is 0.60 ± 0.2 g. The black PBT housing material is specified for compatibility with the wave soldering and manual soldering temperature profiles listed in the product specification.
Contact MEIDI for technical inquiries, sample evaluation, or volume pricing.

The MEIDI HNR-1707 PA10 1707 Piezoelectric Passive Buzzer with Pogo Pin is a through-hole piezoelectric passive buzzer. It runs on an external AC signal, typically a square wave or PWM around its 4000 Hz resonance, to generate audible output. With a 1–30 V peak-to-peak drive range and 5 V rated test voltage, this buzzer measures Φ17.0 × 7.5 mm and weighs 1.35 g. Its black PBT housing supports both wave and manual soldering for smooth integration into **supplier** production lines. Suitable for **batch orders** across audio alert and industrial systems, contact MEIDI for technical questions, sample evaluation, or volume pricing.