MEIDI HN-9040 — a 9 mm × 4 mm 9x4mm SMD Electromagnetic Passive Buzzer rated at 5Vo-p with 40Ω coil resistance and 2730Hz resonant frequency. This SMD buzzer delivers Min. 83dB sound pressure at 10cm under rated drive conditions. Black Noryl housing, 3–8Vo-p operating range, -20℃ to +70℃ rated. Requires external square wave drive. Contact MEIDI for volume pricing or samples.
2730Hz resonant frequency for tone generation with external square wave excitation
40Ω coil impedance for 5V logic-level and buffered driver circuits
Min. 83dB sound pressure at 10cm when driven at 5Vo-p, 2730Hz, 50% duty cycle
3-8Vo-p operating range
Black Noryl housing for stable dimensions during reflow and operation
Product Overview
The MEIDI HN-9040 9x4mm SMD Electromagnetic Passive Buzzer is a surface-mount electromagnetic passive buzzer occupying a 9 mm × 4 mm footprint. The 2730Hz resonant frequency produces a tone suitable for alarm, alert, and status indication functions in electronic enclosures.
With a rated voltage of 5Vo-p and operating range of 3-8Vo-p, the HN-9040 accommodates 5V systems. The 40Ω coil resistance interfaces with standard open-collector transistor drivers and microcontroller GPIO ports when current capability is verified. The black Noryl housing maintains dimensional stability across the operating temperature span.
For systems requiring higher SPL than miniature SMD buzzers provide, the HN-9040 offers increased output without the height penalty of cylindrical through-hole types. Contact MEIDI for SMD buzzer selection guidance.
Key Features
Mid-size SMD form factor --- 9 mm × 4 mm body for surface-mount PCB assemblies
2730Hz resonant frequency --- external square wave drive at rated frequency produces tonal output; DC voltage alone will not generate sound
40Ω coil impedance --- for 5V system integration with transistor or logic-level driver stages
Defined sound pressure --- Min. 83dB at 10cm under 5Vo-p, 2730Hz, 50% duty cycle drive
Extended operating voltage --- 3-8Vo-p range for 5V supply variation
Noryl housing construction --- black thermoplastic housing rated for -20°C to +70°C operation
Technical Specifications
Parameter
Value
Test Conditions
Product Type
Electromagnetic Passive Buzzer
—
Rated Voltage
5Vo-p
Resonant frequency reference
Operating Voltage
3–8Vo-p
Drive signal peak
Rated Current
Max. 80mA
At 2730Hz, 50% duty, 5Vo-p square wave
Sound Pressure Level
Min. 83dB
At 2730Hz, 50% duty, 5Vo-p, 10cm
Coil Resistance
40 ± 4Ω
—
Resonant Frequency
2730Hz
At rated voltage
Operating Temperature
-20℃ ~ +70℃
—
Storage Temperature
-30℃ ~ +80℃
—
Net Weight
Approx. 0.8g
—
Housing Material
Black Noryl
—
Environmental Protection
RoHS
—
Standard Test Conditions: Temperature 25±3℃, Humidity 60±10% R.H., Pressure 860-1060hPa
Typical Applications
Network equipment and server chassis for fault and status audible alerts
Industrial HMI panels and operator interfaces with surface-mount components
Telecommunications infrastructure devices for alarm and maintenance indication tones
Commercial display systems and digital signage for timed alert functions
Factory automation controllers with 5V I/O modules requiring audible feedback
Power distribution and energy management units for threshold exceedance warnings
Why Choose This Model
Design Requirement
HN-9040 Advantage
Acoustic output in SMD format
Min. 83dB SPL in surface-mount package
5V system compatibility
5Vo-p rating with 3-8Vo-p range
Automated production integration
SMD package for pick-and-place and reflow soldering
Supply variation tolerance
8Vo-p maximum operating voltage
Thermal stability
Noryl housing across -20℃ to +70℃
Production & Quality Assurance
MEIDI manufactures the HN-9040 with quality control processes including incoming material inspection, in-process dimensional monitoring, and final electrical verification under standard test conditions of 25±3℃, 60±10% R.H., and 860-1060hPa.
Reliability Testing
After any of the following tests, the product shall meet acceptance criteria: no defects or degradation in appearance and electrical properties (except SPL); SPL shall not decrease by more than 10dB from the minimum SPL specified in the datasheet.
+80℃ storage for 96 hours, recover at room temperature for 3 hours before testing
Low Temperature Test
-40℃ storage for 96 hours, recover at room temperature for 3 hours before testing
Humidity Test
+40±3℃, 90%–95% RH, 48 hours, recover at room temperature for 6 hours before testing
Thermal Shock Test
70℃ 2 hours → -20℃ 2 hours (1 cycle), interval 1 hour between cycles, total 10 cycles
Drop Test
Standard packaging, all 6 faces and 3 edges, drop from 1.2m height onto thick wood board
Vibration Test
1000 cycles/min, amplitude 1.5mm, 1 hour per axis, 3 axes total
Caution: Avoid foreign materials entering the product, including magnetic materials, water-soluble materials, and corrosive gases, as these will affect the electrical performance of the product.
Frequently Asked Questions
1. What is the difference between driving the HN-9040 at 3Vo-p versus 5Vo-p?
At 5Vo-p, the buzzer achieves the rated Min. 83dB sound pressure. At 3Vo-p, output will be reduced due to lower coil excitation. The 3-8Vo-p operating range indicates functional operation across this span, but maximum SPL is realized at the rated 5Vo-p with 50% duty cycle square wave at 2730Hz.
2. Can I use a PWM signal from a microcontroller to drive this buzzer?
Yes, a PWM signal at or near 2730Hz with 50% duty cycle is a suitable drive waveform, provided the microcontroller pin or driver stage can supply the required current. Verify the port current capability or use a transistor buffer stage.
3. How does the 40Ω coil resistance affect driver circuit design?
The 40Ω coil draws a maximum of 80mA at 5Vo-p. Verify your driver stage saturation voltage to ensure adequate voltage swing across the coil.
4. What reflow temperature profile is compatible with the Noryl housing?
The HN-9040 is designed for standard lead-free reflow processes. For specific peak temperature and time-above-liquidus recommendations, contact MEIDI for the reflow soldering profile document.
5. Is the HN-9040 pin-compatible with other 9mm SMD buzzers on the market?
Contact MEIDI for mechanical drawing and recommended land pattern to verify footprint compatibility with your existing PCB layout.
Technical Inquiry
For technical datasheets, reflow soldering profiles, drive circuit application notes, or OEM configuration discussion, contact MEIDI applications engineering.
Ready to ask for a buzzer price? Send your specifications or a sample picture. Meidi Intelligent provides OEM and customized quotation for electromagnetic, piezoelectric and SMD buzzers. Tell us your target quantity for bulk order or wholesale pricing, and we'll return a cheap factory-direct offer with lead time from our China manufacturing site.
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy