Jiangsu Meidi Intelligent Technology Co., Ltd.
Jiangsu Meidi Intelligent Technology Co., Ltd.
Products
9x4.2mm SMD Electromagnetic Passive Buzzer
  • 9x4.2mm SMD Electromagnetic Passive Buzzer9x4.2mm SMD Electromagnetic Passive Buzzer
  • 9x4.2mm SMD Electromagnetic Passive Buzzer9x4.2mm SMD Electromagnetic Passive Buzzer
  • 9x4.2mm SMD Electromagnetic Passive Buzzer9x4.2mm SMD Electromagnetic Passive Buzzer
  • 9x4.2mm SMD Electromagnetic Passive Buzzer9x4.2mm SMD Electromagnetic Passive Buzzer

9x4.2mm SMD Electromagnetic Passive Buzzer

Model:HN-9042W
MEIDI HN-9042W — a 9 mm × 4.2 mm 9x4.2mm SMD Electromagnetic Passive Buzzer rated at 3Vo-p with 16Ω coil resistance and 2730Hz resonant frequency. Designed for 3.3V logic rail integration, this buzzer achieves Min. 85dB sound pressure at 10cm under rated drive conditions. Black LCP housing, 2–4Vo-p operating range, -20℃ to +70℃ rated. Requires external square wave excitation. Submit RFQ or request evaluation units from MEIDI.

9x4.2mm SMD Electromagnetic Passive Buzzer

9 mm × 4.2 mm surface-mount footprint for PCB assemblies

2730Hz resonant frequency for tone generation with external drive

16Ω low coil impedance for 3.3V microcontroller GPIO interfacing

Min. 85dB sound pressure at 10cm when driven at 3Vo-p, 2730Hz, 50% duty cycle

Black LCP housing with thermal stability for lead-free reflow profiles

2-4Vo-p operating range for 3.3V logic supply levels

Product Overview

The MEIDI HN-9042W 9x4.2mm SMD Electromagnetic Passive Buzzer is a surface-mount electromagnetic passive buzzer in a 9 mm × 4.2 mm package, for 3.3V digital systems. The 2730Hz resonant frequency delivers a tone suitable for user feedback, alarm indication, and system status alerting in compact electronic devices.

With a rated voltage of 3Vo-p and 2-4Vo-p operating span, the HN-9042W aligns with standard 3.3V logic rails. The 16Ω coil resistance enables drive evaluation from capable microcontroller ports. The black LCP housing offers dimensional retention at elevated reflow temperatures.

Contact MEIDI for cross-reference assistance when migrating from alternative 3V SMD buzzer products.

Key Features

3.3V-optimized design --- 3Vo-p rating with 2-4Vo-p range for integration with low-voltage logic supplies

16Ω coil impedance --- low resistance for evaluation with direct GPIO drive; verify port current rating for continuous operation

2730Hz resonant frequency --- external square wave excitation at rated frequency produces acoustic output; DC voltage will not generate sound

High SPL in compact package --- Min. 85dB at 10cm under 3Vo-p, 2730Hz, 50% duty cycle drive conditions

LCP housing material --- black liquid crystal polymer housing maintains dimensional stability under surface-mount reflow conditions

Lightweight construction --- approximately 1.0g per unit

Technical Specifications

Parameter Value Test Conditions
Product Type Electromagnetic Passive Buzzer ---
Rated Voltage 3Vo-p Resonant frequency reference
Operating Voltage 2-4Vo-p Drive signal peak
Rated Current Max. 80mA At 2730Hz, 50% duty, 3Vo-p square wave
Sound Pressure Level Min. 85dB At 2730Hz, 50% duty, 3Vo-p, 10cm
Coil Resistance 16 ± 3Ω ---
Resonant Frequency 2730Hz At rated voltage
Operating Temperature -20℃ ~ +70℃ ---
Storage Temperature -30℃ ~ +80℃ ---
Net Weight Approx. 1.0g ---
Housing Material Black LCP ---
Environmental Protection RoHS ---

Standard Test Conditions: Temperature 25±3℃, Humidity 60±10% R.H., Pressure 860-1060hPa

9x4 2mm Smd Electromagnetic Passive Buzzer

Typical Applications

Battery-powered IoT sensor nodes and wireless modules requiring 3.3V-compatible audible alerts

Embedded development boards and evaluation kits for tone generation and user interaction feedback

Low-voltage industrial control modules with 3.3V I/O expansion cards for status and fault annunciation

Smart metering and energy monitoring devices for tamper and threshold alert tones

Consumer electronics remote controls and handheld peripherals for button press confirmation sounds

3D printer controller boards and CNC machine interfaces for operation complete and error condition alerts

Why Choose This Model

Design Requirement HN-9042W Advantage
3.3V system integration 3Vo-p rating for standard logic rails
Direct GPIO drive evaluation 16Ω coil allows initial prototyping without external driver components on capable ports
High-temperature reflow compatibility LCP housing resists deformation under lead-free soldering peak temperatures
Compact acoustic output Min. 85dB SPL from 9 mm × 4.2 mm package
Low-voltage flexibility 2-4Vo-p range accommodates Li-ion battery discharge curves and regulated 3.3V supplies

Production & Quality Assurance

MEIDI manufactures the HN-9042W with quality control processes including incoming material verification, in-process dimensional inspection, and final electrical testing under standard conditions of 25±3℃, 60±10% R.H., and 860-1060hPa. LCP housing material properties are verified for dimensional stability prior to assembly.

Reliability Testing

After any of the following tests, the product shall meet acceptance criteria: no defects or degradation in appearance and electrical properties (except SPL); SPL shall not decrease by more than 10dB from the minimum SPL specified in the datasheet.

Test Item Test Conditions
Life Test 25±10℃, rated voltage, 1/2 duty resonant frequency square wave, 96 hours
High Temperature Test +80℃ storage for 96 hours, recover at room temperature for 3 hours before testing
Low Temperature Test -40℃ storage for 96 hours, recover at room temperature for 3 hours before testing
Humidity Test +40±3℃, 90%–95% RH, 48 hours, recover at room temperature for 6 hours before testing
Thermal Shock Test 70℃ 2 hours → -20℃ 2 hours (1 cycle), interval 1 hour between cycles, total 10 cycles
Drop Test Standard packaging, all 6 faces and 3 edges, drop from 1.2m height onto thick wood board
Vibration Test 1000 cycles/min, amplitude 1.5mm, 1 hour per axis, 3 axes total
9x4 2mm Smd Electromagnetic Passive Buzzer
9x4 2mm Smd Electromagnetic Passive Buzzer
9x4 2mm Smd Electromagnetic Passive Buzzer

Caution: Avoid foreign materials entering the product, including magnetic materials, water-soluble materials, and corrosive gases, as these will affect the electrical performance of the product.

Frequently Asked Questions

1. What is the practical difference between LCP and Noryl housing materials for SMD buzzers?

LCP exhibits higher heat deflection temperature and lower moisture absorption than Noryl, providing enhanced dimensional stability during lead-free reflow soldering and in humid operating environments. For applications where reflow peak temperatures exceed standard profiles or where moisture sensitivity is a concern, LCP housing offers advantages.

2. Can the HN-9042W operate from a 5V supply with a series resistor?

The rated voltage is 3Vo-p with a 2-4Vo-p operating range. Operation at 5Vo-p exceeds the maximum operating voltage and may result in excessive coil current, overheating, or permanent damage. If only a 5V supply is available, use a voltage divider or series resistor to limit coil voltage to within the 4Vo-p maximum, accounting for the 16Ω coil resistance and driver saturation voltage.

3. How do I verify if my microcontroller GPIO can drive this buzzer directly?

Check your microcontroller datasheet for absolute maximum current per GPIO pin and total port current limits. The HN-9042W draws up to 80mA at 3Vo-p. Many 3.3V microcontrollers limit GPIO current to 8-25mA per pin. Exceeding these limits risks port damage or reduced lifespan. For production designs, an external transistor driver is the recommended approach.

4. What duty cycle variation is acceptable while maintaining acceptable SPL?

The datasheet specifies 50% duty cycle for rated SPL measurement. Small deviations from 50% will produce minor SPL variation. Significant deviation toward very low or very high duty cycles reduces average coil current and corresponding acoustic output. For consistent performance, maintain 50% duty cycle at 2730Hz.

5. Does MEIDI offer tape-and-reel packaging for automated assembly?

Contact MEIDI for packaging options including tape-and-reel specifications, reel quantities, and leader/trailer configurations for your pick-and-place equipment requirements.

Technical Inquiry

For technical datasheets, reflow soldering profiles, GPIO drive application notes, or OEM configuration discussion, contact MEIDI applications engineering.

Send Inquiry
Contact Info
Ready to ask for a buzzer price? Send your specifications or a sample picture. Meidi Intelligent provides OEM and customized quotation for electromagnetic, piezoelectric and SMD buzzers. Tell us your target quantity for bulk order or wholesale pricing, and we'll return a cheap factory-direct offer with lead time from our China manufacturing site.
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
RejectAccept