Jiangsu Meidi Intelligent Technology Co., Ltd.
Jiangsu Meidi Intelligent Technology Co., Ltd.
Products
9.6x5mm Through-Hole Electromagnetic Passive Buzzer
  • 9.6x5mm Through-Hole Electromagnetic Passive Buzzer9.6x5mm Through-Hole Electromagnetic Passive Buzzer
  • 9.6x5mm Through-Hole Electromagnetic Passive Buzzer9.6x5mm Through-Hole Electromagnetic Passive Buzzer
  • 9.6x5mm Through-Hole Electromagnetic Passive Buzzer9.6x5mm Through-Hole Electromagnetic Passive Buzzer
  • 9.6x5mm Through-Hole Electromagnetic Passive Buzzer9.6x5mm Through-Hole Electromagnetic Passive Buzzer
  • 9.6x5mm Through-Hole Electromagnetic Passive Buzzer9.6x5mm Through-Hole Electromagnetic Passive Buzzer

9.6x5mm Through-Hole Electromagnetic Passive Buzzer

Model:HN-9650E
MEIDI 9.6x5mm Through-Hole Electromagnetic Passive Buzzer is a through-hole electromagnetic passive buzzer designed for 5V-class OEM and industrial systems that need reliable audible feedback from an external drive source. Rated at 5Vo-p with a 2700Hz resonant frequency and 40Ω coil impedance, the HN-9650E produces Min. 85dB sound pressure at 10cm and operates within a 4–6Vo-p range. The black PPO housing withstands standard hand and wave soldering, making it a fit for equipment panels, alarm units, and status indicators.

Core Advantages of the 9.6x5mm Through‑Hole Electromagnetic Passive Buzzer

9.6 × 5 mm through‑hole package for direct PCB mounting

2700Hz resonant frequency for tonal output with external square wave drive

40Ω coil impedance for 5V‑class driver circuits

Min. 85dB sound pressure at 10cm under 5Vo‑p, 2700Hz, 50% duty cycle

4–6Vo‑p operating voltage range

Black PPO housing rated for -30℃ to +75℃ operation

Product Overview

MEIDI HN‑9650E 9.6x5mm Through-Hole Electromagnetic Passive Buzzer is a through‑hole electromagnetic passive buzzer designed for 5V‑class OEM and industrial systems that need reliable audible feedback from an external drive source. Rated at 5Vo‑p with a 2700Hz resonant frequency and 40Ω coil impedance, the HN‑9650E produces Min. 85dB sound pressure at 10cm and operates within a 4–6Vo‑p range. The black PPO housing withstands standard hand and wave soldering, making it a fit for equipment panels, alarm units, and status indicators.

Technical Specifications

Parameter Value Test Conditions
Product Type Electromagnetic Passive Buzzer —
Rated Voltage 5Vo‑p Resonant frequency reference
Operating Voltage 4–6Vo‑p Drive signal peak
Rated Current Max. 80mA At 2730Hz, 50% duty, 5Vo‑p square wave
Sound Pressure Level Min. 85dB At 2730Hz, 50% duty, 5Vo‑p, 10cm
Coil Resistance 40 ± 4Ω At 25℃, DC
Resonant Frequency 2700Hz At rated voltage
Operating Temperature -30℃ ~ +75℃ —
Storage Temperature -40℃ ~ +85℃ —
Net Weight Approx. 1g —
Housing Material Black PPO —
Environmental Protection RoHS —

Standard Test Conditions: Temperature 25±3℃, Humidity 60±10% R.H., Pressure 860–1060hPa

Note: The rated current and sound pressure test conditions in the original specification reference 2730Hz, while the resonant frequency is specified as 2700Hz. Contact MEIDI to confirm the exact test frequency for your application.

9 6x5mm Through Hole Electromagnetic Passive Buzzerx

Typical Applications

Equipment front panels using through‑hole buzzers for operator alarms

Building and facility monitoring systems with audible warning tones

Power supply and converter modules for over‑temperature alerts

Automated teller and kiosk devices for transaction feedback

Consumer electronics with 5V logic‑level drive circuits

Process controllers requiring 2700Hz status indication

Why Choose This Model

Design Requirement HN‑9650E Advantage
Acoustic output in through‑hole format Min. 85dB SPL in a 9.6 × 5 mm package
5V system compatibility 5Vo‑p rating with 4–6Vo‑p operating range
Manual and automated assembly Through‑hole leads for hand solder and wave soldering
Regulated supply tolerance 6Vo‑p maximum operating voltage
Extended thermal range PPO housing across -30℃ to +75℃

Production & Quality Assurance

MEIDI produces the HN‑9650E under controlled manufacturing processes, including incoming material inspection, coil resistance verification, and acoustic testing for each production lot. Every lot undergoes reliability tests covering life, high/low temperature, humidity, thermal shock, drop, and vibration. After any of these tests, the product must satisfy acceptance criteria with no functional degradation beyond the specified sound pressure tolerance.

Test Item Test Conditions
Life Test 25±10℃, rated voltage, 1/2 duty resonant frequency square wave, 96 hours
High Temperature Test +80℃ storage for 96 hours, recover at room temperature for 3 hours before testing
Low Temperature Test ‑40℃ storage for 96 hours, recover at room temperature for 3 hours before testing
Humidity Test +40±3℃, 90%–95% RH, 48 hours, recover at room temperature for 6 hours before testing
Thermal Shock Test 70℃ 2 hours → -20℃ 2 hours (1 cycle), interval 1 hour between cycles, total 10 cycles
Drop Test Standard packaging, all 6 faces and 3 edges, drop from 1.2m height onto thick wood board
Vibration Test 1000 cycles/min, amplitude 1.5mm, 1 hour per axis, 3 axes total

Caution: Avoid foreign materials entering the product, including magnetic materials, water‑soluble materials, and corrosive gases, as these may affect electrical performance.

9 6x5mm Through Hole Electromagnetic Passive Buzzer

FAQ

1. What drive signal does the HN‑9650E require?

The HN‑9650E is a passive buzzer and needs an external square wave or PWM signal. A 2700Hz, 50% duty cycle square wave at 5Vo‑p yields the rated Min. 85dB output at 10cm. Contact MEIDI for drive circuit application notes.

2. Can the HN‑9650E be driven at 3.3V logic levels?

The rated operating range is 4–6Vo‑p, so 3.3V may fall below the specified drive window. Use a buffering stage to reach the 4–6Vo‑p range, or contact MEIDI for low‑voltage drive guidance.

3. How does the 40Ω coil resistance affect driver design?

The 40Ω coil draws a maximum of 80mA at 5Vo‑p. Confirm your driver stage can supply this current with sufficient saturation voltage and thermal margin.

4. What soldering methods are compatible with the PPO housing?

The through‑hole leads accept standard hand soldering and wave soldering. Limit thermal exposure to within the housing temperature rating. Contact MEIDI for recommended soldering profiles.

5. Is the HN‑9650E pin‑compatible with other 9mm through‑hole buzzers?

Contact MEIDI for the mechanical drawing and recommended hole pattern to verify footprint compatibility with your PCB.

9 6x5mm Through Hole Electromagnetic Passive Buzzer

Technical Inquiry

For technical datasheets, drive circuit notes, reliability test reports, or OEM customization of the HN‑9650E, contact MEIDI. Our team supports evaluation units and application engineering for through‑hole buzzer integration.

Send Inquiry
Contact Info
Ready to ask for a buzzer price? Send your specifications or a sample picture. Meidi Intelligent provides OEM and customized quotation for electromagnetic, piezoelectric and SMD buzzers. Tell us your target quantity for bulk order or wholesale pricing, and we'll return a cheap factory-direct offer with lead time from our China manufacturing site.
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
RejectAccept