MEIDI HN-6535 — a compact 6.5 mm × 3.5 mm 6.5x3.5mm SMD Electromagnetic Passive Buzzer rated at 3Vo-p with 16Ω coil resistance and 2731Hz resonant frequency. Designed for space-constrained PCB assemblies, this buzzer delivers Min. 70dB sound pressure at 10cm when driven with a 50% duty cycle square wave. Black Noryl housing, -20℃ to +70℃ operating temperature, RoHS compliant. Requires external drive signal for tone generation. Submit RFQ or request samples for evaluation.
6.5 mm × 3.5 mm footprint for high-density PCB layouts
2731Hz resonant frequency for tone generation with external square wave drive
16Ω coil impedance for low-voltage logic-level driver circuits
Min. 70dB sound pressure at 10cm under rated 3Vo-p drive conditions
Surface-mount package for automated pick-and-place assembly
-20℃ to +70℃ operating temperature range
Product Overview
The MEIDI HN-6535 6.5x3.5mm SMD Electromagnetic Passive Buzzer is a miniature surface-mount electromagnetic passive buzzer engineered for applications where PCB area is at a premium. At 6.5 mm × 3.5 mm, this buzzer occupies minimal board space while providing audible feedback through external square wave excitation.
The 2731Hz resonant frequency produces a tone suitable for proximity alerts, status indication, and user interface feedback. With a rated voltage of 3Vo-p and operating range of 2-5Vo-p, the HN-6535 integrates with 3.3V and 5V logic rails.
The 16Ω coil resistance allows drive from microcontroller GPIO pins or low-side transistor switches in space-constrained designs. The black Noryl housing provides dimensional stability during reflow soldering processes. For applications requiring alternative resonant frequencies in compact form factors, contact MEIDI for SMD buzzer solutions.
Key Features
Miniature SMD footprint --- 6.5 mm × 3.5 mm body size for high-density PCB assemblies where through-hole mounting is impractical
2731Hz resonant frequency --- tone generation when driven with external square wave at rated frequency; requires AC excitation, DC voltage alone will not produce sound
Low coil impedance --- 16Ω resistance for interfacing with 3V logic-level outputs
Defined acoustic output --- Min. 70dB at 10cm when driven at 3Vo-p, 2731Hz, 50% duty cycle square wave
Noryl housing material --- black thermoplastic housing compatible with standard surface-mount reflow profiles
Lightweight construction --- approximately 0.5g per unit
Technical Specifications
Parameter
Value
Test Conditions
Product Type
Electromagnetic Passive Buzzer
---
Rated Voltage
3Vo-p
Resonant frequency reference
Operating Voltage
2-5Vo-p
Drive signal peak
Rated Current
Max. 80mA
At 2731Hz, 50% duty, 3Vo-p square wave
Sound Pressure Level
Min. 70dB
At 2731Hz, 50% duty, 3Vo-p, 10cm
Coil Resistance
16 ± 3Ω
---
Resonant Frequency
2731Hz
At rated voltage
Operating Temperature
-20℃ ~ +70℃
---
Storage Temperature
-30℃ ~ +80℃
---
Net Weight
Approx. 0.5g
---
Housing Material
Black Noryl
---
Environmental Protection
RoHS
---
Standard Test Conditions: Temperature 25±3℃, Humidity 60±10% R.H., Pressure 860-1060hPa
Typical Applications
Portable medical devices and health monitors requiring compact audible alerts in battery-powered enclosures
Smart home sensors and IoT gateways with limited PCB real estate for audio feedback components
Handheld instrumentation and meter devices for operation confirmation tones
Wearable electronics and fitness trackers where component height and weight are constrained
Compact appliance control boards in kitchen and household equipment for timer and alarm functions
POS terminals and payment devices for transaction status audible indication
Why Choose This Model
Design Requirement
HN-6535 Advantage
Space-constrained PCB layouts
6.5 mm × 3.5 mm SMD footprint minimizes board area consumption
Low-voltage system integration
3Vo-p rating with 2-5Vo-p range for 3.3V/5V logic compatibility
High-volume automated assembly
Surface-mount package compatible with standard pick-and-place and reflow processes
Low mass applications
Approx. 0.5g per unit, suitable for portable and handheld designs
Environmental compliance
RoHS compliant
Production & Quality Assurance
MEIDI manufactures the HN-6535 with quality control processes covering incoming material inspection, in-process dimensional verification, and final electrical parameter testing. Standard test conditions are maintained at 25±3℃ temperature, 60±10% relative humidity, and 860-1060hPa atmospheric pressure for consistent measurement repeatability.
Reliability Testing
After any of the following tests, the product shall meet acceptance criteria: no defects or degradation in appearance and electrical properties (except SPL); SPL shall not decrease by more than 10dB from the minimum SPL specified in the datasheet.
+80℃ storage for 96 hours, recover at room temperature for 3 hours before testing
Low Temperature Test
-30℃ storage for 96 hours, recover at room temperature for 3 hours before testing
Humidity Test
+40±3℃, 90%–95% RH, 48 hours, recover at room temperature for 6 hours before testing
Thermal Shock Test
70℃ 2 hours → -20℃ 2 hours (1 cycle), interval 1 hour between cycles, total 10 cycles
Drop Test
Standard packaging, all 6 faces and 3 edges, drop from 1.2m height onto thick wood board
Vibration Test
1000 cycles/min, amplitude 1.5mm, 1 hour per axis, 3 axes total
Caution: Avoid foreign materials entering the product, including magnetic materials, water-soluble materials, and corrosive gases, as these will affect the electrical performance of the product.
Frequently Asked Questions
1. What soldering process is recommended for the HN-6535 SMD buzzer?
Contact MEIDI for the recommended reflow soldering profile. The black Noryl housing is compatible with standard surface-mount reflow processes.
2. Can the HN-6535 be driven directly from a microcontroller GPIO pin?
The 16Ω coil draws a maximum of 80mA at 3Vo-p. Verify that your microcontroller GPIO can source or sink this current continuously. If the GPIO current rating is insufficient, use a low-side NPN or MOSFET switch with a current-limiting resistor.
3. What happens if the buzzer is driven at a frequency other than 2731Hz?
Sound pressure level decreases when driven off-resonance. For consistent Min. 70dB output, drive at 2731Hz with 50% duty cycle square wave at 3Vo-p. Operation far from resonance may result in substantially reduced audible output.
4. Is the HN-6535 suitable for continuous tone generation applications?
The life test condition specifies 96 hours of continuous operation at rated voltage and resonant frequency. For applications requiring longer continuous operation periods, contact MEIDI for reliability data specific to your duty cycle and environmental conditions.
5. Are alternative package sizes available with the same 2731Hz resonant frequency?
Contact MEIDI for technical inquiries regarding alternative form factors and coil configurations within the electromagnetic passive buzzer product range.
Technical Inquiry
For technical datasheets, reflow soldering profiles, drive circuit application notes, or OEM configuration discussion, contact MEIDI applications engineering.
Ready to ask for a buzzer price? Send your specifications or a sample picture. Meidi Intelligent provides OEM and customized quotation for electromagnetic, piezoelectric and SMD buzzers. Tell us your target quantity for bulk order or wholesale pricing, and we'll return a cheap factory-direct offer with lead time from our China manufacturing site.
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy